Research Reactors and Radiation
Measurements |
| No. 302 |
Radioactive environment
characterisation using multi detector arrays and a 3-dimensional
scanning Lidar
Matthew Ryan Tucker - United Kingdom |
| No. 303 |
Ageing Management Program revision
for the Pavia TRIGA MK II research reactor
Andrea Gandini, Federico Alfinito, Daniele Alloni, Michelangelo Giordano,
Andrea Salvini - Italy |
| No. 304 |
The European Nuclear Experimental
Educational Platform – ENEEP: Overview and Demonstration
Activities
Vladimir Radulović, Anže Jazbec, Luka Snoj, Ján Haščík, Branislav Vrban,
Štefan Čerba, Jakub Lüley, Lubomir Sklenka, Marcel Miglierini,
Ondrej Novak, Helmuth Boeck Prof.Dr., Marcella Cagnazzo, Mario
Villa, Szabolcs Czifrus, Attila Tormási - Slovenia |
| No. 305 |
New Research Reactor Developments
in Slovenia
Jan Malec, Vladimir Radulović, Anže Jazbec, Mitja Uršič, Iztok Tiselj, Borut
Smodiš, Klemen Ambrožič, Anže Pungerčič, Christophe Destouches,
Robert Jacqmin, Gilles Bignan, Xavier Wohleber, Luka Snoj -
Slovenia |
| No. 306 |
Dynamic Mode Decomposition Analysis
of a Cooling Channel of the TRIGA Mark II Reactor
Carolina Introini, Vittoria Brega, Antonio Cammi - Italy |
| No. 308 |
Analysis of water activation loop
at the JSI TRIGA research reactor
Domen Kotnik, Anil Kumar Basavaraj, Igor Lengar - Slovenia |
| No. 310 |
Jožef Stefan Institute TRIGA
Research Reactor Activities in the Period from September 2021 –
August 2022
Anže Jazbec, Sebastjan Rupnik, Vladimir Radulović, Borut Smodiš, Luka Snoj -
Slovenia |
| No. 311 |
Analysis of the void coefficient in
Pavia TRIGA Mark-II reactor: Monte Carlo numerical evaluation
and comparison with experimental data
Riccardo Boccelli, Antonio Cammi, Carolina Introini, Stefano Lorenzi - Italy |
| No. 312 |
Testing of Silicon Carbide Neutron
Detector for Detection of Fast Neutrons
Ylenia Žiber, Vladimir Radulović - Slovenia |
Thermal-Hydraulics |
| No. 401 |
SURET is a new form of subchannel
thermohydraulic calculations
Áron Vécsi, Gábor Házi, Csaba Horváth, István Pós, Zoltán Kálya, Tamás Parkó,
Márton Horváth - Hungary |
| No. 402 |
Thermal-Hydraulic Analysis of the
2nd Stage Hydroaccumulators Impact in MB/LBLOCA Sequences along
with SBO
Elena Redondo-Valero, César Queral, Victor Hugo Sanchez-Espinoza, Kevin
Fernández-Cosials - Spain |
| No. 403 |
CFD Simulation of a VVER-1000/320
at Nominal Operating Conditions
Ossama Halim, Andrea Pucciarelli, Nicola Forgione - Italy |
| No. 404 |
Scaling down of PWR nuclear power
plant secondary side for SIRIO experimental facility supported
by system thermal-hydraulic codes
Samantha Larriba, Rok Krpan, Gonzalo Jimenez, Elena Redondo, César Queral,
Jure Oder, Ivo Kljenak - Spain |
| No. 405 |
Multiphysics Analysis of an in-core
Fission Product Removal System for the Molten Salt Fast Reactor
Federico Scioscioli, Antonio Cammi, Carolina Introini, Stefano Lorenzi -
Italy |
| No. 406 |
Experimental study on bubble size
distributions in horizontal narrow-gap annular heat exchanger
Boštjan Zajec, Leon Cizelj, Boštjan Končar - Slovenia |
| No. 407 |
Simulation of flow in PWR reactor
pressure vessel downcomer
Aljaž Kekec, Jure Marn, Ivo Kljenak - Slovenia |
| No. 408 |
Simulation of Liquid Waves With
Flow Reversal in Stratified Counter-Current Flow With a Hybrid
Multi-Fluid Model
Matej Tekavčič, Richard Meller, Benjamin Krull, Fabian Schlegel - Slovenia |
| No. 409 |
Thermal-hydraulic analysis of
TEPLATOR moderator cooling system
Tomáš Kořínek, Martin Lovecký, Ondřej Burian, Radek Škoda - Czech Republic |
| No. 410 |
Passive Isolation Condenser
Modeling With Apros Computer Code
Luka Štrubelj, Klemen Debelak - Slovenia |
| No. 412 |
Analysis of bubble breakup
sensitivity on fluid properties using Large Eddy Simulations
Jan Kren, Blaž Mikuž - Slovenia |
| No. 413 |
Design optimization of heat
transfer performance in the heads of flow boiling experiment
Anil Kumar Basavaraj, Boštjan Zajec, Blaž Mikuž - Slovenia |
| No. 414 |
Application of enhanced
phase-change model for simulation of film boiling around a
cylinder
Mihael Boštjan Končar, Matej Tekavčič, Mitja Uršič - Slovenia |
| No. 415 |
Inviscid fluid simulation through
Incompressible Schrödinger Flow method: a Finite Element
approach
Stefano Riva, Antonio Cammi, Carolina Introini - Italy |
| No. 416 |
Review of application of FFTBM method for code accuracy quantification
Qingling Cai, Francesco D Auria, Jianqiang Shan - China |
| No. 417 |
Review of fonesys and silence nuclear thermal-hydraulic networks achievements
Qingling Cai, Klaus Umminger, Dominique Bestion, Francesco D Auria, Fabio
Moretti, Marco Lanfredini - China |
| No. 418 |
Thermal efficiency of protective
cladding layers in liquid sodium-cooled heat sinks containing
sharp corners
Nima Fathi, Mahyar Pourghasemi - USA |
Reactor Physics |
| No. 501 |
The Definition of Mini Labyrinth
Benchmark for Radiation Shielding Calculations
Branislav Vrban, Štefan Čerba, Jakub Lüley, Vendula Filova, Vladimir Nečas,
Erwan Radenac - Slovakia |
| No. 503 |
Burnup code automation and optimization - fuel assembly application
Arturo Vivancos - Spain |
| No. 504 |
Implementation and validation of
the steady state SP3 approximation in the GRS FENNECS code
Silvia Lo Muzio, Armin Seubert - Germany |
| No. 506 |
Application of machine learning to
interpolation and evaluation of delayed-neutron multiplicity
Abdoulaye Sakho, Ivan Kodeli, Pierre-Jacques Dossantos-Uzarralde - France |
| No. 507 |
On the calculation of adjoint
neutron flux in typical PWR for the determination of the neutron
flux redistribution factors
Tanja Goričanec, Luka Snoj, Marjan Kromar - Slovenia |
| No. 508 |
Our Experiences with the Benchmark
“Rostov-2”
Elina Oberlander, Helmut Glöde, Kai-Martin Haendel - Germany |
| No. 509 |
Modelling gamma calorimetry
experiment with JSIR2S code
Klemen Ambrožič, Vladimir Radulović, Hubert Carcreff, Damien Fourmentel,
Luka Snoj - Slovenia |
| No. 510 |
Burnup measurements using fuel
reactivity worth experiments at the JSI TRIGA Research Reactor
Anže Pungerčič, Alireza Haghighat, Luka Snoj - Slovenia |
| No. 511 |
Maximum required excess reactivity
due to Xe-135 “poisoning”
Blaž Levpušček, Gašper Žerovnik, Luka Snoj - Slovenia |
| No. 513 |
Moderator Heat Sources in TEPLATOR
District Heating SMR
Martin Lovecký, Tomáš Kořínek, Jiří Závorka, Jana Jiřičková, Radek Škoda -
Czech Republic |
| No. 515 |
Calculation and verification of the
new neutron absorbers in a well-defined core in LR-0 reactor
Jiří Závorka, Martin Lovecký, Radek Škoda - Czech Republic |
| No. 516 |
Neutronic Analysis of Various Fuels
for the TEPLATOR HT
Tomáš Peltan, Eva Vilímová, Radek Škoda - Czech Republic |
| No. 517 |
On the effective fuel temperature
of the UO2 fuel
Dušan Čalič, Marjan Kromar - Slovenia |
| No. 518 |
A Monte Carlo fuel assembly model
validation adopting Post Irradiation Experiment dataset
Antonio Cammi, Stefano Lorenzi, Lorenzo Loi - Italy |
| No. 519 |
Dose Rate Assessment around the
PCFV Release Line during Severe Accident Conditions in Nuclear
Power Plant Krsko
Davor Grgić, Paulina Dučkić, Vesna Benčik, Siniša Šadek - Croatia |
Materials in Nuclear Technology |
| No. 602 |
PATHFINDER: A tool for calculating
pathways for fusion-activated materials
Priti Kanth, Mark Gilbert, David Foster - United Kingdom |
| No. 603 |
Strain localization in austenitic
stainless steel due to hydrogen concentration
Amirhossein Lame Jouybari, Samir El Shawish, Leon Cizelj - Slovenia |
| No. 605 |
Heat Capacity of PuO2 at High
Temperature: a comparison of interatomic potentials
Rolando Calabrese - Italy |
| No. 606 |
Crystallographic phase transition
of zirconium alloys: new models for the TRANSURANUS code
Rolando Calabrese - Italy |
| No. 607 |
Development of a 3D-RPV Finite
Element Model for Pressurized Thermal Shock Analyses
Oriol Costa Garrido, Nejc Kromar, Andrej Prošek, Leon Cizelj - Slovenia |
| No. 608 |
Direct conditioning of molten salt
arising from the thermal treatment of solid organic waste
Anna Sears, Vojtěch Galek, Petr Pražák, Jan Hadrava - Czech Republic |
| No. 609 |
Thick protective Fe and Mo coatings
for PbLi coolant environments prepared by RF-ICP and cold spray
Lukáš Babka, Jan Cizek, Jakub Klecka - Czech Republic |
| No. 610 |
Comparing different approaches to
intergranular-stress modelling
Timon Mede, Samir El Shawish - Slovenia |
| No. 613 |
Towards More Ductile Refractory
High-Entropy Alloys at Room Temperature
Salvador Rodriguez, Eric Lang, Sharpe Rob, Erin Barrick, Darryn Fleming,
Andrew Kustas, Levi Van Bastian, Graham Monroe, Nima Fathi -
Slovenia |
Nuclear Power Plant Operation |
| No. 902 |
Reliability Analyses of Emergency
Power Systems with focus on Multi-Group Diesel Configurations
Manuel Gueldner, Mariana Jockenhövel-Barttfeld - Germany |
| No. 903 |
Application of flex strategies to cope with a station blackout (SBO) situation
Sergio Courtin, César Queral, Alberto García-Herranz, Marcos Cabezas, Julia
Herrero-Otero - Spain |
| No. 905 |
Production of hydrogen and synthetic methane with nuclear power plants
Kaja Zupancic, Jure Jazbinšek, Tomaž Žagar - Slovenia |
| No. 906 |
Unsupervised ML anomaly detection
approach for NPPs LTO Program
Salvatore Angelo Cancemi, Rosa Lo Frano - Italy |
| No. 909 |
Seasonal and daily operation of
nuclear based district heating system with varying energy demand
Jan Škarohlíd, Radek Škoda, Tomáš Kořínek - Czech Republic |
| No. 910 |
Optimization of Sizing and
Operation of a Nuclear District Heating System Using Teplator,
Gas Boiler and Heat Storage
Hussein Abushamah, David Masata, Jana Jiřičková, Radek Škoda - Czech
Republic |
| No. 911 |
Simulation of load following
operation with a PWR reactor
Dušan Čalič, Luka Snoj, Gašper Žerovnik - Slovenia |
| No. 912 |
Modernization of the Fuel Assembly
Register Software
Sebastian Pleško, Slavko Slavič, Bojan Žefran, Marjan Kromar, Luka Snoj -
Slovenia |
| No. 913 |
Dynamic Electrical Simulation Model
of NPP Krsko
Luka Zidarič, Aleksandar Momirovski, Milos Maksic, Dragotin Vehovar -
Slovenia |
| No. 915 |
Resampling a Detailed Reactor Power
History With the Cycle Power History Script
Vid Merljak - Slovenia |
Fusion |
| No. 1000 |
Overview of the JET
Deuterium-Tritium fusion experiments
Henri Weisen, Jet Contributors - Switzerland |
| No. 1002 |
Design of an Automated System for
Electrolytic Fusion Fuel Implantation in Metallic Filaments
Yannick Verbelen, Mahmoud Bakr Arby, Tom Wallace-Smith, Thomas B. Scott -
United Kingdom |
| No. 1003 |
Cross-section analysis for neutron
producing fusion reactions in pre-fusion power operation of the
ITER tokamak
Andrej Žohar, Anders Hjalmarsson, Žiga Štancar, Andrej Trkov, Luka Snoj -
Slovenia |
| No. 1008 |
STOK – a tool for parametric
modelling of simple tokamaks
Anže Gabrijel, Aljaž Čufar - Slovenia |
| No. 1009 |
Towards automation of fusion
reactor design optimization – neutronic optimization in simple
parametric models
Aljaž Čufar, Anže Gabrijel - Slovenia |
| No. 1010 |
Analysis of Large Helium Ingress
into the DEMO Cryostat Using MELCOR for Fusion
Rok Krpan, Janez Kokalj, Mitja Uršič, Matjaž Leskovar, Boštjan Končar -
Slovenia |
| No. 1011 |
Simulation of Natural Convection
in DEMO Cryostat During Helium Ingress Accident
Matija Založnik, Rok Krpan, Martin Draksler, Matej Tekavčič, Mitja Uršič -
Slovenia |
| No. 1012 |
Development of a Thermohydraulic
Model for DTT PFU
Patrik Tarfila, Boštjan Končar, Oriol Costa Garrido, Giacomo Dose, Francesco
Giorgetti, Selanna Roccella - Slovenia |
| No. 1013 |
Kinetic Effects in ITER Scrape-off
Layer
Ivona Vasileska, Leon Kos - Slovenia |
| No. 1014 |
Towards refactoring of the TOKES
tokamak plasma transient code
Leon Bogdanović, Sergey Pestchanyi, Leon Kos - Slovenia |
| No. 1015 |
Natural convection cooling in DEMO
Vacuum Vessel during ex-VV LOCA
Martin Draksler, Primož Črne, Christian Bachmann, Sergio Ciattaglia, Ivo
Moscato, Boštjan Končar - Slovenia |
Severe Accidents and PSA |
| No. 1101 |
Analysis of the impact of some post-Fukushima improvements in design extension conditions sequences
Alberto García-Herranz, César Queral, Sergio Courtin, Marcos Cabezas, Julia
Herrero-Otero, Enrique Meléndez Asensio, Miguel Sánchez Perea,
Rafael Mendizábal - Spain |
| No. 1103 |
Importance of Physics-aware Use
of Area Validation Metric for LES Methanol Pool Fire Simulation Data
Nima Fathi, Jared Kirsch - USA |
| No. 1104 |
Experiments on radiolysis gas
detonation in BWR exhaust pipes and mechanical response to the
detonation pressure loads
Mikhail Kuznetsov, Joachim Grune, Reinhard Redlinger, Wolfgang Breitung -
Germany |
| No. 1105 |
Influence of Non-Condensable
Gas-Dust Mixture on Direct Contact Condensation of Steam at
Atmospheric Pressure
Luca Berti, Alessio Pesetti, Michele Raucci, Guglielmo Giambartolomei,
Donato Aquaro - Italy |
| No. 1106 |
Analysis of Influence of DEC
Equipment on Severe Accident Development
Matjaž Leskovar, Mitja Uršič, Janez Kokalj - Slovenia |
| No. 1107 |
Effect of sump pH on iodine
release from VVER-1000/V-320 containment during LB LOCA
Adam Kecek, Lubomir Denk - Czech Republic |
| No. 1108 |
Application of the generic and specific SPAR-CSN probabilistic safety assessment models to several incidents
Julia Herrero-Otero, Enrique Meléndez Asensio, Miguel Sánchez Perea, César
Queral, Marcos Cabezas, Sergio Courtin, Alberto García-Herranz,
Carlos París, Rafael Iglesias - Spain |
| No. 1110 |
Supervised Machine Learning-based
Feature Selection in the Frame of BEPU in Severe Accidents
Michela Angelucci, Rafael Bocanegra, Sandro Paci, Luis E. Herranz - Italy |
| No. 1111 |
Application of dynamic bayesian
network in initiating event calculation
Aleksej Kaszko, Piotr Kopka - Poland |
| No. 1112 |
RELAP5 Simulations of Total Loss
of Feedwater in a PWR
Andrej Prošek - Slovenia |
| No. 1115 |
Simulation of fuel-coolant
interaction in stratified configuration in reactor geometry
Janez Kokalj, Mitja Uršič, Matjaž Leskovar - Slovenia |
| No. 1117 |
Calculation of the QUENCH-02
experiment with the ASYST code including the uncertainty
evaluation
Siniša Šadek, Renato Pavlinac, Karlo Ivanjko, Davor Grgić - Croatia |
